Mudroom storage bench – Having your family and friends take off their shoes before entering your home protects your carpet from wear and prevents slips caused by water being tracked in shoes, among other things. The addition of a bench to your small room at the entrance, meanwhile, you, your family and your guests gives you a place to sit and put on shoes again when you leave. Instead of spending a lot of money to buy a bank bought in the store, create your own account. Next, place canvas containers under the bench to provide a place to store things such as gloves, hats and scarves.
Cut four pieces of 16 x 16 x 1 inch pieces of wood with a circular saw to create the side pieces and dividers. Cut two pieces of 46 by 16 by 1 inch pieces of wood to the top and bottom of the bench. Then, cut a piece of 46 by 16 by 3 plywood / 4 inches for the back of the bench. Create a rectangle of two of the side pieces and the top and bottom pieces. Rest the four pieces on their sides by 1 inch. Place the cut end of the side pieces against the long side of the top and bottom pieces. And then, apply the wood glue where the pieces meet. Hammer 2-inch nails through the top and bottom pieces on the cut edges of the side pieces. Place a nail every 4 inches.
And then, slide the two divider pieces between the top and bottom pieces. Space them 14 inches on either side to create three equal compartments. Secure the dividers instead by hammering nails through the top and bottom pieces at the ends of the dividers, spacing the nails every 4 inches along the dividers. And also, place the piece of plywood against the back of the bench. Since the construction is symmetrical, the back can be either side. Choose the side that looks the best built. Nail a finishing nail through the plywood into the side pieces, top, bottom and end dividers. Space the nails every 6 inches.
Paint or dye the bank built in the color you want. Let the paint or stain dry overnight. Insert a 13 by 13 by 10 inch canvas tray into each of the three compartments on the bench. Adjust the measurements as desired to create a larger or smaller bank. Also, adjust the measurements if containers of different dimensions are used. You do it be carefully.