Ideas Platform Queen Beds At Walmart

Dec 1st

Queen Beds At Walmart – Building a platform bed consists of little more than making a box model with braces in the center and placing a solid piece on top. Queen size mattresses measure approximately 60 inches wide by 80 inches long. The platform must be able to support these dimensions with approximately 2 inches along the sides and at the foot of the bed to take into account the differences in sizes of the manufacturers.

Place a 60-inch plank on the floor. Measure 1 inch from the edge and with a pencil place a mark, repeat the mark on the other end of the board. Do the same with the other two 60-inch queen beds at walmart boards. Draw a straight line on the markings on the ends of the planks, with a level or a carpenter’s square. Select a drill that has the same diameter or one slightly smaller than the body of the screws. Place the drill in the drill.

Drill three pilot holes, at equal distances in the line drawn along the 60-inch planks. Place one of the 60-inch planks vertically and one of the 78-inch planks along the long edge. Place them in an L or 90 ° angle, one end of the cut side of the long plank against the short plank, through the pilot holes. Insert queen beds at walmart wood screws into the guide holes of the short plank and into the long plank with an electric drill.

READ :  Modern Leather Recliner Ideas