Glass Sliding Patio Door Curtains

Mar 5th

The sliding patio door curtains in your apartment or apartment need to be cleaned occasionally to maintain both beauty and function. The glass on both sides will collect dirt and look unattractive. Dirt and junk collected in the grooves will keep the door from opening properly. Your solution is to clean the web except the glass. Apart from this, cleaning a sliding glass door does not differ much from cleaning a large glass window

Instructions

Open the glass door all the way. Use a vacuum cleaner with a magic wand attachment to suck dirt and debris from the track. Close the hatch. Now you’re ready to clean the glass. Use a separately sold window socket or create your own. If you choose to make your own, you can use the following recipes from MrsRenlighet USA: Pour 1 cup of alcohol, 1 dl vinegar and 1 dl of water in a spray bottle. Shake it up to mix the ingredients. Put on rubber gloves. Spray cleaners all over one side (or exterior) of glass that covers it completely. Use a lint-free cloth to wipe cleaner, starting from the top of the glass and moving downwards with vertical movements.

Spray the glass again, covering it. Use a clean rubber scratch on the glass. This minimizes stripes. Repeat the same process on the other side of the glass. Mix u00BD teaspoon liquid detergent in a bowl with a cup of hot water. Open glass sliding door again. Dip a sponge or a bottle of brush into this solution and clean the sliding track. Rinse the sponge or bottle brush and wipe it over the web again to remove excess cleaner. Follow this with a dry, lint-free cloth. Now, as spray lubricants in the track, as proposed by Mrs. Clean USA. You can buy it in hardware and home furnishings stores.

READ :  Coffee Station Organizer Ideas

Tips and warnings

Clean the glass at least once a week for best results. The groove must not be cleaned every time, but vacuum it at least once a month and wipe it when you notice a buildup of dirt. Building a 4-foot wide with 6-foot-High cabinet with two sliding glass doors to display antiques, collectibles or other items is a fairly simple task and may be cheaper than buying one. All you need is a pair of carpentry tools, plywood, bets or paint, hardware and two ready-made glass doors. Construct 4-foot with 6-foot outer frame for the cabinet. Place two 4-foot pieces on the edge parallel to each other 6 meters apart. Insert the side pieces between them, one on each side, fill the frame. Run four screws along each end of the upper and lower sides and attach them.